The best way to Hang Artwork on Plaster Walls

The best way to Hang Artwork on Plaster Walls

When hung correctly, art completes the look of your house. Both light and large items need hangers that are durable so that they drop from the wall or do not sag ahead, resulting in harm to both the wall area and the-art. Crumble or plaster walls tend to crack therefore hanging artwork is a particular challenge because of this type of area. Using the hardware that is proper for hanging artwork mixed using the installation techniques that are proper stops this injury in order to enjoy the art as an alternative to spending time on expensive repairs.

Check to get a wall stud in the hanging location that is required. Tap along with your knuckles before the wall makes a great sound, indicating the existence of a stud on the wall. There isn’t any stud in the area, in the event the wall seems hollow.

Mark the hanging location using a pencil. Place a bit of painters tape on the area that is marked. The tape stops the wall when you install the image hanger from crumbling or cracking.

If you’re hanging in area with no wall stud, drill a hole the diameter of the plaster anchor insert. Place the insert in the hole before the the top of the insert is flush with all the hole and tap it in the hole using a hammer. Remove the tape.

Screw a wood screw to the anchor that is plastic. Therefore it will not grab under the fat of the-art the screw expands the anchor in the plaster. Remove the screw.

Place a photo hook with all the screw opening on the insert opening, if relevant. Spot the hook within the pencil mark, in the event that you are hanging on a stud.

Screw the wood screw through the opening in the photo hook and to the anchor. If you’re hanging on a-wall without without needing a plastic anchor stud screw straight through the plaster and to the wall stud behind it.

See related