The best way to Refinish Cedar on a Hot Tub
As it’s both long-lasting and attractive, Cedar is usually applied to decks and spa surrounds. Oils in cedar normally resist moisture and insects, but it can be dried by continuous contact with sun outdoors and make it drop a few of its own natural colour and rot-resistance. Re-finishing cedar and bringing back the colour will make it a more more desirable asset to your house will avoid significant injury to your hot tub. Cedar is simple to restore alive, and servicing that is normal can keep it looking young for years.
Drain your hot-tub and eliminate the last vestiges of water using towels and a wet/dry shop vacuum. Let wood and the tub dry. Mix 1/2 cup of trisodium phosphate (TSP) in a gallon of water and scrub the cedar with a nylon brush dipped in to the combination. Scrub on places that are discolored or stained. Rinse the cedar using a hose and allow the tub dry.
Mix 1/2 cup of bleach in a gallon of warm water and wipe all wood with a cloth dipped Wear a breathing mask as well as gloves while operating together with the bleach solution. Wash the bleach off using a hose, being cautious not to drain the the answer in to furniture or flowerbeds. Let the tub dry totally.
Sand the cedar using a hand-powered sander, you start with with 60-grit sandpaper before the the conclusion is totally easy and scratches and progressing through 180-grit and 100-grit, gouges or splinters are smoothed out. Wear a mask while sanding and function patiently; it is going to have a very long time to sand all wood surfaces 3 times.
The cedar using a shop-VAC to to eliminate all particles and the dirt, then wipe it using a tack fabric to complete the cleansing. Get the the top of wood to as near its authentic appear as achievable; the cedar colour ought to be uniform and vibrant. Touch up any areas which might be discolored with still another round of sanding and bleach.
Seal or stain your cedar. Use an obvious sealer to protect the cedar seem that is authentic or utilize a cedar stain to accomplish a color that is preferred. Stain on using a rag, permit it sit one minute, then wipe it off using a clear rag. Apply an additional coat in the event the cedar shade is also gentle. Look a-T samples in building-supply retailer or a paint before picking one.
The cedar that is refurbished complete with two coats of exterior polyurethane. Brush sand it with extra-fine sandpaper and on one-coat using an excellent paintbrush, allow it dry totally. Remove any dirt with tack fabric and utilize another coat. Let the polyurethane dry entirely before refilling the tub.